SGM-200C Selladora Grado Médico para Rollos de Esterilización con Cortador / Sello: Largo: 220mm  Ancho : 8mm
DESCRIPCIÓN

Sealing Machine is intended for sealing envelopes for steam sterilization. Follow strictly the instructions from the manufacturer of your packages regarding their appropriate usage, cautions, conservation and storage and adjust the timer according to thickness of the material to be sealed. Use a high-number for thicker material.

CARACTERÍSTICAS
  • Economic, practical, exquisite design, applied to food, medicine, etc.
  • Copper transformer, stable quality, durable.
  • High quality silicone rubber piece, higher heat resistance, longer service life, ensure better effective sealing.
  • Designed to avoid cutting accidents and protect hands.<
INSTRUCTIONS

Adjust the timer according to thickness of the material to be sealed. Use a high-number for thicker material.

Important! In order to enhance the quality of the sealing, perform the resistance pre-heating. Press the sealer arm twice simulating the sealing without a package. This procedure may be performed only once before starting the sealing procedure itself but it should be repeated every time the equipment goes idle for longer than 1 minute.

Place the envelope on the sealing platform always with the paper side down (directly on the resistance) and the plastic side up and press the sealer arm down firmly. The heating time is controlled automatically after manual adjustment.

When the red LED goes off the sealing will be completed. Slide the blade to cut the envelope, raise the sealer arm and remove the package.

Note: 
In order to make the sealing better, wait for 1 or 2 seconds to release the sealer arm after the red LED goes off. If the heating time is too long or insufficient the sealing might be inefficient (the envelope may be stuck to the sealing area when it is pulled or be visibly badly-sealed). To correct this, adjust the timer properly. Once adjusted it is not necessary to perform any other adjustment to continue sealing.

ADDITIONAL INFOMATIONS

Keep the sealing platform always clean. The accumulation of waste on the sealing area will reduce the life cycle of the resistance and the insulating material. For an effective cleaning, wait for the sealing area to cool down and use a cloth slightly moistened with alcohol.

If the insulating material lower tape is worn the sealer may go faulty and the resistance may be damaged. Being so, every time the resistance is replaced, please also check the insulating material tape and replace it if it is worn.

If it is necessary to replace the resistance or the fuse, use only those which have the same specifications as the genuine parts.
  1)- New concept of design;
  2)- Economical and practical;
  3)- Designed to avoid cutting accidents and protect hands.

ESPECIFICACIONES TÉCNICAS
Modelo SGM-200C
Largo del Sello 220mm
Ancho del Sello 8mm
Tipo de Tranformador Alta Calidad: Cobre
Potencia 600Watts
Voltaje 110V-60Hz
Dimensiones 363x 98x 150 mm
Peso del la Selladora 3.5 kg


Escriba una opinión

Por favor inicio de sesión o registrarse en opinar

SGM-200C Selladora Grado Médico con Cortador y Sello: 220 / 8mm

  • Código del producto: SGM-200C
  • Disponibilidad: En Stock

Productos relacionados

SGM-300C Selladora Grado Médico con Cortador y Sello: 320 / 8mm

SGM-300C Selladora Grado Médico con Cortador y Sello: 320 / 8mm

SGM-300C Selladora Grado Médico para Rollos de Esterilización con Cortador / Sello: Largo: 320mm  Ancho : 8mm DE..

SGM-250SC Selladora Grado Médico de Acero Inoxidable con Cortador y Sello: 250 / 10mm

SGM-250SC Selladora Grado Médico de Acero Inoxidable con Cortador y Sello: 250 / 10mm

SGM-250SC Selladora para Rollos de Esterilización de Acero Inoxidable con Cortador / Sello: Largo: 250mm - Ancho: 10mm ..

Etiquetas: Selladoras Manuales, Selladoras de Impulso, Selladoras de Impulso Manuales, Selladoras para Autoclave, Selladoras para Bolsas de Esterilización